Showing posts with label instructions. Show all posts
Showing posts with label instructions. Show all posts

Dreamcatcher Drama

Remember a while back when I posted the instructions on how to make a dreamcatcher? My sister Kaisu wrote it as she's expert at all fabulous nature things. Here's a reminder of a snowy catcher she made:


I wanted to make one too and followed Kaisu's instructions, step by step. Somehow I just couldn't figure it out:


I posted this pic on my Facebook and inspired my other sister Minna to make her first dreamcatcher:


As you can see, her catcher is quite multisupernovadimensional, and has a dried flower on it. Here's Minna's story:

Here's my first dreamcatcher. I walked in the forest next to our house with the flute ready in my mouth, to play a little thank you song for the tree. As soon as I step in the forest, even before I played anything, I found a perfect bending branch in the ground, so I didn't even have to cut it from a living tree. I continued walking in the forest a little bit, playing the flute, trying few sticks from the ground, they all broke when bending them. Then I saw a tin box in the ground, took it to the trash and decided my exchange with the forest wouldn't end more perfectly ♥
Seeing all this dreamcatching going down, our mom Heini got inspired as well and made her first one:


That's a cute little bird bead in the middle. That bird punatulkku is very common in Finland, bullfinch in English.


Mom made another one with moss from the forest:


Craftically speaking, I have decided to move on and leave dreamcatchers to those who have what it takes. This is my new project that's spread out all over the living room floor:


Tomorrow my friend Danielle will borrow me her sewing machine and I'll be able to really get cracking. I'll let you know if anything comes out of this. I'm very excited though. Do you have any crafts or arts projects/ideas you've been planning or working on lately?

How to Make a Hula Hoop in 8 Easy Steps

1. Get tubing from a hardware store. I use one that’s 3/4” wide and has 100 PSI (PSI measures the pressure a tube can handle). The bigger the PSI, the heavier the hoop will be. 100 PSI is nice and light.


2. Measure where to cut the tubing. It’s easier to hoop with a bigger hula hoop because it moves slower around you. A big size would reach between your stomach and chest, or even up to your chest. A normal size would be up to your waist/belly.


3. Cut the tubing in the spot you measured. Kitchen knife works well, I have also used a saw before with harder tubing. Try to cut straight. Watch your fingers (duh). You might want to use sandpaper to smooth out the edges where you cut.


4. Get a 3/4” plastic connector to match the width of your tubing. They are sold in hardware stores as well for about one dollar.


5. Heat and soften a few inches of the tip of the tubing. With this particular tubing, 15 seconds was enough. I rolled the tubing around the fire so that it would melt evenly on all sides. In the process the other end of the tubing went all around the kitchen and knocked down my camera from the table, banging onto the stone-tiled floor. So be careful. Don’t let it melt too much either. If you smell something funny, quit heating it.



6. Quickly push the connector half way inside the tubing. Then put it immediately under cold water so the tubing won’t continue to melt and deform too much on the connector.


7. Heat the other end of the tubing and push it on the remaining half of the connector. Push the tubing as close to the other end of the tubing as possible. Again, give it a quick cold shower. The skeleton is done!


8. Now dress your precious. You can use (colorful) electrical tape which is sold in all hardware stores. I got some fancy holographic and gaffer tapes, from DIY Hoop Supply on Etsy. Fancy-Tapes is a popular source for European hoopers.


For maximum hoopyness, extend the joy and make a hula hoop or two for your friends too! I made these for Citra and Deva. You should see Deva hoop, it's the cutest thing ever!



If you have any further tips or questions for successful hoop making, please leave them in the comments!

Blog Archive