Showing posts with label Getsumento Heiki Mina. Show all posts
Showing posts with label Getsumento Heiki Mina. Show all posts

Kuro Daikon ♠ Black Radish Mina Weapon - 2




photo by Orz_Phtogrphy


I had been working on my weapon props for Ootsuki since earlier in this year, I had attemped to McGuyver my way into making these props with whatever I could find that could in some way resemble what I needed, yet the outcome to all my efforts resulted in this:




The original shape of the plastic cauldrons had warped because of the expanding foam, I couldn't really achieve a smooth surface with paper mache + primer + bondo, which ended up making the props much heavier than I had intended them to be. It was an all around failure T_T










As my luck would have it I met the talented Jessie Melero who has the most amazing workshop my eyes ever had the privilege to witness upon. O_O



Jessie was kind enough to take on a professional approach to making my weapons and I got to watch, learn and photograph this process.



Jessie has urethane foam of varying densities in his shop. My main concern was the final weight of the props, so the foam that was chosen is not very dense -therefore light- almost resembling the texture of a dried up sponge.



(click image for large view)










From a huge block of foam, the circumference of the props was drawn in and then two square blocks were cut from it.





After that the foam was cut with a knife to get a rough cylinder shape.



"It's as smooth as cutting butter" he said... Which is true, if you're not careful and cut your foam too hastily huge chunks will come off, since it is easily sliced.





(click image for larger view)










After this point, the center of the cylinder is marked and lines mark how much needs to be cut off to prepare for the sanding stage.



You can see my Ootsuki Mina figure next to the foam, and behind the stack of leftover foam that resulted from the initial cutting, this foam scraps will be great for some smaller props!



After the second rough shape was achieved, Jessie hand sanded those cylinders into submission with a crazy sanding rod/knife!





(click image for larger view)













The sanding knife still left some roughness, once the two pieces were closer to the final shape, they were further smoothed out with sanding paper.



Because of the it's low density, the foam has to be covered with fiberglass to give it a protective layer and smooth surface. Coats of primer and spot fixing putty (the red spots) finalize the smooth finish of the props.





Jessie used two coats of Design Master's spray paint for the color. This brand of paint dries very fast!
















The rods were made out of two wood dowels Jessie had lying around, the tips were sanded down until the desired shape was achieved (which kinda resembles a stake and could be dangerous if you're not careful...) 





The radish weapons have a small hole on the top where the rods are inserted and stay in simply with pressure. The bottom has a carved out area to insert the radish leaves.













photo by pgw-Chaos


The radish leaves were made with green foamies and attached on a posterboard base that was then attached to the bottom of the radish using sticky velcro and later on hot gule as I became pressed for time.



The end result were some incredibly smooth and shiny looking radishes! Considering the large size of the prop each radish weighted about 3 lbs. which was much lighter than what I was making before.



The day of the shoot the Florida heat was on full power to make us all suffer and after about 3 hours of walking around and taking photos I was having a hard time keeping a grip on my weapons (cuz my hands were sweaty inside the gloves) or lifting them very high. I had to carry these props the entire time they were with me, since putting them down on a hard surface could chip the fiberglass or damage the leaves, taking all that into consideration (and the need to increase my arm strength...) I'm so glad they were relatively light!

Ootsuki Mina Cosplay Gallery 1

I had so many pictures taken for this costume while I was at Megacon! I'm really happy, if only my other Minas had made it in time :(

I've scheduled to wear this costume again for AFO and OTAKON and both will be with Rabbit Force groups, I'm the Ootsuki Mina for ACP's Project V8: Getsumen to Heiki Mina!! I plan to improving parts of the costume and props :D



Ok, now I shut up and I post some pictures:





My first awesome Ootsuki Mina picture to come out! Thanks to 0rz Phtgrphy! :D

So lucky that there was that black backdrop and a sweet ray of sunlight.



 Rabbit Duo by iM Photography.



 Patcave caught us by the food concessions.


Photo by Howie Muzika, with our new cosplay convert Wraiv3n as Nouhime.



A shot of our bunny pair by LJinto.



 and a portrait by LJinto :3

Kuro Daikon ♠ Black Radish Mina Weapon - 1

It's Spring Break! I've been working on my Mina costume, of course I everything ends up taking longer than I calculate it will... here's the progress on my rotund-ly huge weapon.






Miss Ootsuki Mina will escort you through the construction process!
I started with two black cauldrons I purchased during Halloween.
I also got a scythe cuz I liked that it assembled with 3 rods...





(I used an exacto knife I heated up with a candle =_= )
I had to remove the rim of the cauldron for the desired shape. Apparently you can easily cut plastic with a hot knife. The masking tape was a recommended safety measure.


 The same cutting process is used for the bottom. The radish leaves will come out of here so I need another hole.


 I got some pipe connectors that can screw into each other to attach the daikon leaves. Added expanding foam and hot glue to secure it into place.





so many rods!
 I cut the 3 rods of the Halloween scythe in half so I could use the connecting parts. More length will be added with a paper tube and a wooden stick.




 Taping up my tubes... I went back and filled them with expanding foam to reinforce them and secure the parts together.




 Ta-dah~
So this is what all my parts put together are looking like :3
So far so good.

This is Cosplay @ Art Basel

From the CS Gallery opening during the Art Basel week. Many thanks to Lazaro Diaz and Juan Navarro for deciding to exhibit cosplay in their gallery! Cosplay in America also send some oversized prints of his gorgeous photos. It was so much fun times!




Picture with Laz, who worked really hard to have this event become a reality!

He also did private shoots with some of the cosplayers before the event.

Behind us is a picture from the Cosplay Artwalk.





Eating pita chips and talking about the Odette costume,

my darling Tewibewi went as my chaperone





With Señor G (Morataya) and Kumagoro-kun.

It had been such a long time since we hanged so we had a blast XD



Semi-debut for Ootsuki Mina?

I really wanted to wear it but it still needs some work.



Supercon Javi pimping himself some ladies...



DAT LIGHTSABER. DAT ASS.



Group Pic!



Noticed that G was trying to take a candid picture, so I did this XD



Yes, Odette, you brought me so much suffering;

now I shall only display you instead of wearing you.
Photos by This is Cosplay, Flash Fotography, and Morataya Photography.

Oh-noes-tsuki Mina



I comissioned this costume on eBay cuz I'm seriously too lazy/busy and untalented in sewing to make it on my own. The bodysuit has to be taken in which I can completely manage and was even expecting would happen. That's fine.



What's not fine are the gloves and boot covers. See that glove? It's pink! BABY PINK. It should be purple, I could even live with blue. But not pink :(

The reference picture I gave to the seller doesn't show a tinge of pink, which in some illustrations can look maybe close to fuschia.



BUT I LOVE PURPLE. Thusly, I wanted to cosplay the purple Rabbit Force character.

Ok, now to figure out how to make my boobs look like this, permanently.

2010 plans and accomplishments

Found this on 4chan, pretty self explanatory, eh?

Blog Archive