Showing posts with label work in progress. Show all posts
Showing posts with label work in progress. Show all posts

Kuro Daikon ♠ Black Radish Mina Weapon - 2




photo by Orz_Phtogrphy


I had been working on my weapon props for Ootsuki since earlier in this year, I had attemped to McGuyver my way into making these props with whatever I could find that could in some way resemble what I needed, yet the outcome to all my efforts resulted in this:




The original shape of the plastic cauldrons had warped because of the expanding foam, I couldn't really achieve a smooth surface with paper mache + primer + bondo, which ended up making the props much heavier than I had intended them to be. It was an all around failure T_T










As my luck would have it I met the talented Jessie Melero who has the most amazing workshop my eyes ever had the privilege to witness upon. O_O



Jessie was kind enough to take on a professional approach to making my weapons and I got to watch, learn and photograph this process.



Jessie has urethane foam of varying densities in his shop. My main concern was the final weight of the props, so the foam that was chosen is not very dense -therefore light- almost resembling the texture of a dried up sponge.



(click image for large view)










From a huge block of foam, the circumference of the props was drawn in and then two square blocks were cut from it.





After that the foam was cut with a knife to get a rough cylinder shape.



"It's as smooth as cutting butter" he said... Which is true, if you're not careful and cut your foam too hastily huge chunks will come off, since it is easily sliced.





(click image for larger view)










After this point, the center of the cylinder is marked and lines mark how much needs to be cut off to prepare for the sanding stage.



You can see my Ootsuki Mina figure next to the foam, and behind the stack of leftover foam that resulted from the initial cutting, this foam scraps will be great for some smaller props!



After the second rough shape was achieved, Jessie hand sanded those cylinders into submission with a crazy sanding rod/knife!





(click image for larger view)













The sanding knife still left some roughness, once the two pieces were closer to the final shape, they were further smoothed out with sanding paper.



Because of the it's low density, the foam has to be covered with fiberglass to give it a protective layer and smooth surface. Coats of primer and spot fixing putty (the red spots) finalize the smooth finish of the props.





Jessie used two coats of Design Master's spray paint for the color. This brand of paint dries very fast!
















The rods were made out of two wood dowels Jessie had lying around, the tips were sanded down until the desired shape was achieved (which kinda resembles a stake and could be dangerous if you're not careful...) 





The radish weapons have a small hole on the top where the rods are inserted and stay in simply with pressure. The bottom has a carved out area to insert the radish leaves.













photo by pgw-Chaos


The radish leaves were made with green foamies and attached on a posterboard base that was then attached to the bottom of the radish using sticky velcro and later on hot gule as I became pressed for time.



The end result were some incredibly smooth and shiny looking radishes! Considering the large size of the prop each radish weighted about 3 lbs. which was much lighter than what I was making before.



The day of the shoot the Florida heat was on full power to make us all suffer and after about 3 hours of walking around and taking photos I was having a hard time keeping a grip on my weapons (cuz my hands were sweaty inside the gloves) or lifting them very high. I had to carry these props the entire time they were with me, since putting them down on a hard surface could chip the fiberglass or damage the leaves, taking all that into consideration (and the need to increase my arm strength...) I'm so glad they were relatively light!

Muchi Muchi Pork! Progress

We're seriously going through with this... completing the costume in record time. I've gotta say Junicorn is extremely focused when it comes to getting the cosplay done and if it wasn't for her we wouldn't have this much done.



 Due to time constraints, we got a pair of bikinis that most closely resembled the designs, rather than making our own from scratch. Good thing it's summer because we were able to find water guns to server our porky shooting purposes.



 The rough pattern Katakuchi Ikuo. We had to buy new gloves since our method of "painting" them white totally failed with the first pair. I love the little piggy ears and hair accessory.



Rough pattern for Barasoto Momoi. I love the color contrast for the characters. We got our lycra at a place downtown called Nuñez Fabrics. If you are ever in Miami and need lycra, this place has it ALL. If not you can go to the store next door to them!

Shinobu-chan in progress!

Despite my constant battles with the sewing machine, I was able to make lots of progress on my Shinobu costume last night! I also have almost finished the Sasuke ninja costume for my all purpose asian to wear :3



I'm pretty happy I can take Shinobu to the Morikami shoot! I'll worry about having more props (Onsokumaru!) and accessories later on.

Sewing frustration =_=

I've been working on and off on the Hanekawa costume, it's not a priority since there really isn't a group cosplay that I have to complete it for, but if feels like I've been working on this costume the most because of all the problems I've ran into trying to make it myself... and Koyomi's jacket.

Apparently it is almost impossible to find a pattern for a men's jacket, there are more patterns for women's but they're more business like, and those puffy sleeves~ pft, what a joke.



I kinda sorta learned how to make a pleated skirt:






pleat making contraption, made from scratch!





skirt test





skirt with waistband pinned


Except all these layers refuse to sew through the sewing machine =_= I've tried heavy duty needles, different tension settings, maybe it's the thread I'm using!?

All aspects of this costume have been too frustrating, I just don't want to do it anymore...



Instead I'll moving to Shinobu-chan YEY! Goodbye Tsubasa cat >_>

Kuro Daikon ♠ Black Radish Mina Weapon - 1

It's Spring Break! I've been working on my Mina costume, of course I everything ends up taking longer than I calculate it will... here's the progress on my rotund-ly huge weapon.






Miss Ootsuki Mina will escort you through the construction process!
I started with two black cauldrons I purchased during Halloween.
I also got a scythe cuz I liked that it assembled with 3 rods...





(I used an exacto knife I heated up with a candle =_= )
I had to remove the rim of the cauldron for the desired shape. Apparently you can easily cut plastic with a hot knife. The masking tape was a recommended safety measure.


 The same cutting process is used for the bottom. The radish leaves will come out of here so I need another hole.


 I got some pipe connectors that can screw into each other to attach the daikon leaves. Added expanding foam and hot glue to secure it into place.





so many rods!
 I cut the 3 rods of the Halloween scythe in half so I could use the connecting parts. More length will be added with a paper tube and a wooden stick.




 Taping up my tubes... I went back and filled them with expanding foam to reinforce them and secure the parts together.




 Ta-dah~
So this is what all my parts put together are looking like :3
So far so good.

Hanekawa Progress

I'll admit to originally planning on having this costume commissioned or even buying it online, but most stores only sell the long-sleeved version, after all I should learn how to sew more things!!





So far we've gathered the fabric, super exact shoes and incredibly huge and dorky glasses.



These two pics are actually from last year, from when Makyz first mentioned doing Bakemonogatari cosplay to me, he suggested Senjougahara and I was like, PFT Hanekawa all the way~ check it out!

Oh-noes-tsuki Mina



I comissioned this costume on eBay cuz I'm seriously too lazy/busy and untalented in sewing to make it on my own. The bodysuit has to be taken in which I can completely manage and was even expecting would happen. That's fine.



What's not fine are the gloves and boot covers. See that glove? It's pink! BABY PINK. It should be purple, I could even live with blue. But not pink :(

The reference picture I gave to the seller doesn't show a tinge of pink, which in some illustrations can look maybe close to fuschia.



BUT I LOVE PURPLE. Thusly, I wanted to cosplay the purple Rabbit Force character.

Ok, now to figure out how to make my boobs look like this, permanently.

Some fun facts about Bonney



I got parts of the Jewelry Bonney ensemble at American Apparel, yet ended up returning what could almost be the perfect Bonney shorts because #1 they were too high on the waist and #2 my thighs battled with said shorts...



I was out on the hunt for shorts again, which is quite an aradous task when you got legs like mine. Finally snagged a pair of much cheaper white shorts that had to be stewed died to a bright red!



The yellow tights were actually meant to be used for some other cosplay, but I quickly butchered them to make these psychedelic stockings. I had to hand draw the pattern while wearing them, and not by using a paper roll tube like I hoped =/

Life saver Tewi attached the frilly tops and ex-coworker Kristen was kind enough to finish filling in the patterns on them while eduring sharpie fumes as we drove to Orlando for the con.



I really want to have a turkey prop for this costume... but constantly worry about staining the white top. This fanart (and other NSFW pics that turned up during my reference search) is probably why I have so many spread-eagled poses for this character...! XD

K-ON!: Hey, Listen!



My secret AWA Ball cosplay unveiled!! XD

Oh Mio chan, God bless you for having such cute yet simple outfits. I basically took the dress I used for my previous K-ON! cosplay and modified it to look like this one; I already had the stockings, shoes, and belt for this get up, so yea why not? This totally saved me cuz I was racking my head for what I could wear to this event, and I didn't want to whip out some crazy elaborate outfit.

The only thing crazy about this is the hair extensions for it!

Check out the video with the ED song! As you can see this dress only appears for a very short time, but she looks super cute in it!





Spanish subtitles for the win! =P

Straberry props? Yum :3

Fang... let's try again.



Turns out I'll be wearing Fang again, this time for AWA. I lack the awesome wig styling skills of the gorgeous Tranquility and her epic Fang wig, so I ordered a pre-made one from Cosplay Station and it looks like it'll work alright.

I'm running into more trouble wearing wigs now that I've grown my hair longer... >_> add my big head + low forehead to the equation = oh noes.

The first time I wore this costume I was rushed to put everything on quickly and didn't have a reference picture with me. My make-up was too light and I didn't make my features too Fang-like, so I ran a test (on one side of my face >_<) with a darker skin tone, bronze highlights and a ton of eyeliner! I like this look much better :3

Now I should work on her accessories hmm...

A new challenger enters the ring!


Teri had an extra Dixie Clements (Rumble Roses) costume lying around that she ordered from somewhere in China just in case she couldn't make it on time. Apparently we also have a surplus of blonde wigs from the whole Odin Sphere ordeal X3

This is too much fun to wear! I wanna do a shoot with 2 Dixies!!





Jet, Set, Radio GO!

One week to complete Jet Set Radio Future cosplay! (more like 48 hours actually...)

Biggest ordeal so far: lycra fabric. Next on the list: thundering asymmetrical triangles in clothing.



No skates, so let's make some boot covers.



With funky "shocker" thunderbolts!



Striped scarf, hooray! The only thing I got done this morning >3<

The helper kitty



My kitty Kurochi / Kurocha engaging in normal cat behavior and "helping" with the cosplay work.

When the dress was done I had to keep him out of the house cuz he would just go at that lace like crazy~

By now we should be eating tacos at the Tampa Taco Bus :3

See you at Metrocon!



For those of you that ain't there, this is what you're missing, except 20X more epic looking!

Inferno King Onyx!



So we pinned Hong with Onyx and after many nights of nagging he finally came down with a pattern for his armor.



Miss Teri took this to the back and made it into armor forged by infernal fires!



And then she proceeds to aid us in our cosplay quest.

Blog Archive